ON-LINE INVERTER (UNINTERRUPTIBLE) (5-20 KVA)

FEATURES

3 to 20 kVA - Single Phase

UL924 Listed

Manufactured for Hostile Environments

Outdoor Applications

Remote Locations

Incandescent, Fluorescent, or HID

INPUT SPECIFICATION

Nominal Input Voltage: 120, or 208, or 240, or 277 VAC single phase

Input Voltage Range: +20% to -35%

Input Frequency: 60 Hz +5%

Power Factor: 0.7

Overcurrent Protection: Circuit breaker

Power Connection: Hard wired (terminal block)

Input Configuration: 2 wire (hot, neutral) plus ground

OUTPUT SPECIFICATION

Output Rating: 3, 4.4, 5.4 , 8, 10, 15, and 20 kVA (Normal Mode/Emergency Mode)

Voltage: 120/240, 277 VAC, Single Phase Voltage Regulation: +3% No Load to Full Load; +3% High Line to Low Line

Frequency: 60 Hz +0.25 Hz (When on Inverter)

Waveshape: Sine Wave

Harmonic Distortion: <7% THD; <5% Single Harmonic

Crest Factor: Up to 3 to 1

Power Factor 0.7

Overload: 125% for Ten (10) Minutes; 150% Surge

Protection: Fault Current Limited by Ferroresonant Design

Noise Rejection: -120 dB Common Mode; -60 dB Normal Mode

Operating Temp: Tested for -29F(-34C) to 136F(58C)

PHYSICAL SPECIFICATION

Accessibility: All Servicing is through the Front.

Cable Entry: Bottom

Mounting: Four (4) Mounting Holes Provided to Anchor Enclosure to Pedestal

BATTERY SPECIFICATION

Battery Run Time: 90 min

Battery Type: Sealed, Maintenance-Free, Lead calcium

Nominal DC Link: 48 or 120 VDC link

Overcurrent Protection: Circuit Breaker