VANDAL EMERGENCY LIGHTING HIGH ABUSE, TAMPERPROOF, DAMP AND WET LOCATION UNIT

PRODUCT OVERVIEW

The Symmetry Vandal Series is designed to provide an attractive emergency lighting solution for damp/wet location, vandal prone or high abuse areas. The powerful MR16 halogen lamps are fully adjustable, and are secured by an attractive molded lampholder which conceals all lamp head wiring. The housing, backplate and electronics shell are injection molded from a premium impact resistant polycarbonate. Wet location units are fully gasketed to prevent water entry. The product is UL listed for damp locations as standard. With the optional battery heater, the wet location listed unit is rated for use in temperatures down to -4°F (-20°C). A tamperproofing screw kit is standard with all units.

ILLUMINATION

llumination is provided by two high performance 5.5 watt, 6 VDC MR16-style halogen lamps. Lamps are held in an attractive molded swivel assembly, and are fully adjustable. When mounted on 18ft centers (8ft AFF) the SV16 will provide an average of one footcandle along a linear path of egress. IES photometric files are available.

CHARGING CIRCUITRY

Unit shall utilize a solid-state, fully automatic, voltage regulated charging system which will maintain the battery at full capacity without the need for periodic exercising or equalization. The following features shall be standard: Low voltage disconnect (LVD), brownout

INSTALLATION

Wet location units may be mounted to standard 3-1/2in and 4in octagonal junction boxes. Damp location units may be junction box or rigid conduit mounted.

HOUSING

The high abuse housing, backplate and electronics shell are molded from high impact, GE Lexan® polycarbonate. All injection molded components meet the UL 94 V-0, 5 VA flame retardant standard for emergency lighting products. White housing is standard, with an optional black housing available. All units are supplied standard with a UL damp location listing and tamperproof screw kit. Optional wet location listed products include a fully gasketed cover. Standard non-tamperproof screws are also included with the product. Installation is simplified by the use of a snap-together backplate and housing. When installed with the supplied tamperproof screw kit, removal from mounting surface, or removal of outer protective cover is not possible under normal service conditions without the use of a torx T-15 bit. Utility supply is completed by use of a modular plug-in wiring harness. A convenient knockout is also made available in the top right section of product to accommodate 1/2in conduit (damp location listed units only).

ELECTRONICS

120/277 VAC dual voltage input with surge-protected, solid-state, fully automatic, voltage regulated charger. Charging system is complete with low voltage disconnect, AC lockout, brownout protection and combination indicator lamp and illuminated test switch. All circuit board components are coated with a moisture resistant protector.

OPERATING TEMPERATURE RANGE

Damp location: 50°F (10°C) to 104°F (40°C)

Wet location: 41°F (5°C) to 104°F (40°C)

Wet location with heater: -4°F (-20°C) to 104°F (40°C)

CODE COMPLIANCE

UL 924 listed

UL damp location listed

UL wet location listing optional

NFPA 101, NEC, IBC

Meets ADA specifications for wall mounted lighting fixtures

ELECTRICAL SPECIFICATIONS

Input Power Requirements
120 VAC - 0.05 amps
120 VAC - 0.30 amps (with heater option)
277 VAC - 0.02 amps
277 VAC - 0.13 amps (with heater option)

WARRANTY

Three year full warranty

One year full plus four year prorated battery warranty

ALL SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.