VANDAL RESISTANT EMERGENCY LIGHT WITH BATTERY BACKUP

Download TES-VDR Vandal Resistant Emergency Light Cut Sheet

PRODUCT OVERVIEW

The TES-VDR series of emergency lighting units are constructed from durable and secure polycarbonate and 18 gauge steel. The VDR has been designed with the PulseGuard pulse switching charger. The PulseGuard offers superior performance and energy efficiency versus conventional constant voltage chargers. Single or double 10 watt halogen lamps can be ordered. Tamper resistant hardware is standard.

EXTERNAL SPECIFICATIONS

The TES-VDR series is constructed with an 18 gauge steel housing and impact resistant polycarbonate diffuser. White powder coat finish is standard (other colors optional). Internal emergency light source available configured with single or double 10 watt halogen lamps. Conduit knockouts are located on (3) three sides and the back of each unit. External test switch and monitor LED are standard.

MECHANICAL SPECIFICATIONS

The TES-VDR is constructed with a durable 18 gauge steel housing and impact, corrosion and flame resistant polycarbonate diffuser. Stamped conduit knockouts are located on (3) three sides and the back of the TES-VDR unit. The TES-VDR is supplied standard in a durable white powder coat, baked finish. Other colors are available, including custom color matching, please specify. External test switch and monitor LED are standard.

CHARGER SPECIFICATIONS

The TES-VDR series utilizes a pulse switching charger that is up to 70% more efficient than traditional constant voltage chargers. The charger is a fully automatic current limited charger with solid state line-latched low voltage disconnect protection. All components used in the circuitry are temperature compensated. The charger also has brownout and short circuit protection. Charger status is easily determined via a dual diagnostic LED display which indicates AC/ON and High Charge. An external push button test switch allows maintenance personnel to quickly determine the operational status of the unit and lamp load.

LAMPHEAD FEATURES

The TES-VDR series is normally supplied with (1) one or (2) two internally mounted 10 watt halogen lamps. Please specify the lamp configuration required when ordering.

BATTERY TECHNOLOGY

The TES-VDR series is designed with a maintenance free, sealed valve regulated lead acid battery that provides a minimum emergency duration of 90 minutes (for the listed rating). Recharge time of the battery is twenty-four (24) hours. The maximum working temperature is 50 C.

INSTALLATION

The TES-VDR emergency luminaire is suitable for surface wall or ceiling mounting. Suitable for indoor and damp installations on normally inflammable surfaces.

AUTO TEST

The TES-VDR auto-test feature automatically monitors the functional operation of the unit. Auto-test monitors the operation of the lamps, battery and circuitry and displays any alerts. Periodic emergency tests, up to ninety (90) minutes duration are simulated to ensure proper operation during an actual power failure. Operating status is visually indicated by multi-function LED indication.

WARRANTY

The TES-VDR comes from the factory with an unconditional 5 year product warranty. Lamps are not covered.