Product Info
This product is available in many options. Below is one common setup.

Steel Emergency Light

  • Class 2, Divsion 2,
  • Groups F and G,
  • 50 Watt
  • 6 Volt Nickel Cadmium Battery
  • Two 18 Watt Heads
  • CLASS 1, DIVISION 2 EMERGENCY LIGHTING UNITS

    Download the Cutsheet for Explosion Proof Emergency Light

    Lead Calcium, Nickel Cadmium or PureLead Battery - 6 and 12 volt, 25 to 125 watts

    ILLUMINATION
    Illumination is accomplished with lamp heads mounted on the top of the unit. The Class 1, Div 2 rated “Z” Series lamp head is available in a variety of wattages and is constructed of gray polycarbonate to match the RH Series housing.

    HOUSING
    Constructed of impact resistant, fiberglass reinforced polyester. Housing color is gray and includes stainless steel hardware. Housing is approved for NEMA 4, 4x, 12 and 13 areas, and in class I, Division 2, Groups A, B, C & D, Zone 2, Groups IIA, IIB, H & IIC areas. Viewthrough window allows easy monitoring of AC indicator and optional voltmeter and ammeter. Available with Class II, Division 2 rated polycarbonate sealed beam Par 36 tungsten or halogen lamp heads. Optional shatter-resistant shield for lamp heads is designed for use in food service areas.

    ELECTRONICS
    120/277 VAC dual voltage input with surge-protected, solid-state circuitry provides for a reliable charging system. Select units include a temperature-compensated charger. Charging system is complete with low voltage disconnect, AC lockout, brown-out protection, AC indicator lamp and test switch.

    BATTERY
    Maintenance-free, sealed nickel cadmium battery has an estimated service life of 12 years, and an operating temperature range of 20°F (-7°C) to 95°F (35°C). Maintenance-free, sealed lead calcium battery has an estimated service life of 10 years, and an operating temperature range of 65°F (19°C) to 85°F (30°C). Batteries supply 90 minutes of emergency power.

    PERFORMANCE
    Input power requirements 120VAC - 0.58 amps (max), 65 watts max. 277VAC - 0.27 amps, 68 watts max.

    BATTERY
    Maintenance-free, sealed nickel cadmium battery has an estimated service life of 12 years, and an operating temperature range of 20°F (-7°C) to 95°F (35°C). Maintenance-free, sealed lead calcium battery has an estimated service life of 10 years, and an operating temperature range of 65°F (19°C) to 85°F (30°C). Batteries supply 90 minutes of emergency power.

    HOUSING
    Impact resistant, fiberglass reinforced polyester is suitable for NEMA 4, 4x, 12 and 13 areas. Housing color is gray One-piece formed gasket eliminates potential for seal failure. Standard internal mounting or external mounting feet for installation flexibility. View-through window enables easy monitoring of AC indicator and optional metering. Polycarbonate sealed beam Par 36 lamp heads are Class I, Division 2 rated and come in a variety of wattages.

    AUTOMATIC DIAGNOSTIC TESTER
    Our ST option conducts automatic and manual tests, and indicates real time status of the lamp, battery and charger via tricolor indicator lamps. Automatic tests include: Systems analysis every 10 seconds, with actual load tests performed for a 3 minute duration every 30 days, and for a 30 minute duration every 180 days. Manual tests include a 3, 30 and 90 minute battery discharge and lamp illumination tests.

    STANDARDS COMPLIANCE
    The RH Series meets or exceeds all performance standards as required by UL 924, NFPA 7O, NFPA 101, NEC and OSHA. Nickel cadmium units additionally UL listed for Class 1, Division 2, Groups F & G applications.

    Class 1 Div 1 Emergency Light

    hazardous Emergency Light Size

    Class 2 Div 2 Emergency Light

    Options Info
    Related Products
    Exit Sign, Exit Light - The Exit Store

    My Cart Cart | My Account | Check Out | Site Map
    Customer Service | 1.866.471.2849 | New Account | Sign In