FLUORESCENT BALLAST BATTERY PACK

Download TES-EB500 Fluorescent Ballast Battery Pack Cut Sheet

PRODUCT OVERVIEW

The TES-EB500 Fluorescent Emergency Ballast allows the same fixture to be used for both normal and emergency operation. In the event of a power failure, the TES-EB500 switches to the emergency mode and operates one of the existing lamps for 90 minutes. The unit contains a battery, charger, and inverter circuit in a single can. The TES-EB500 can be mounted in the wireway or on top of the fixture, and is UL Listed for factory installation or retrofit applications. The TES-EB500 can be used with most 2 Ft - 4 Ft lamps, with an initial output of up to 500 lumens for one or two lamps.

FEATURES

UL Listed
5 Year Warranty
Long life, high temperature NiCad battery
Will cold start and operate all specified lamps
Dual voltage 120/277V, 60Hz
Painted steel case
Includes one piece Indicator Light and Test Switch
LED Charge Indicator
Meets or exceeds all National Electrical Code and Life Safety Code emergency lighting requirements
90 minute emergency operation

TECHNICAL SPECIFICATIONS

Input Voltage: 120/277V, 60 Hz
Input Wattage: 3.5 Watts
Lamps Operated: For use with (1) 17W - 40W, 2ft - 4ft single and bipin, T8, T10, and T12 fluorescent lamps without integral starters, including U-shaped, circline, energy saving and 4-pin compact fluorescent lamps.
Emergency Operation: 90 minutes
Minimum Initial Illumination: 1 Lamp 350 Lumens
Approval: U.L. Listed
Weight: 2 lbs
Operating Temperature Range: 0º to 55º C

CODE COMPLIANCE

U.L. 924 listed for factory installations or field retrofit applications. Emergency illumination time exceeds the National Electric Code (NEC), Life Safety Code (NFPA-LSP), and U.L. 924 90 minute requirements.

WARRANTY

The Exit Store guarantees each product to be free from defects to the original purchaser for a period of 3 years from the date of purchase. If any component is found to be defective, The Exit Store will repair or replace the defective component at their option. Warranty does not cover damage caused by improper installation, misuse, abuse, improper environmental conditions, unauthorized modifications or shipping damage. Damage caused by explosions, water leaks, fire, war or acts of God are also not covered