INDUSTRIAL NEMA 4X EMERGENCY LIGHT WITH BATTERY BACKUP Download TES-EDT Industrial Emergency Light Cut Sheet
The TES-EDT series of industrial emergency lighting units are designed to be affordable, durable and dependable. The NEMA 4x rated fiberglass housing can be used in most damp,wet and hose down areas. The TES-EDT series has been designed with the PulseGuard pulse switching charger. The PulseGuard offers superior performance & energy efficiency versus conventional constant voltage chargers. Traditional top mounted (LR)Par36 style heads are standard.
The TES-EDT series is constructed with a durable NEMA 4x rated fiberglass cabinet. Industrial grey finish is standard. Emergency lighting heads are molded from high impact thermoplastic in a matching color; (LR) Par36 style heads are standard. Integrated mounting feet ensure proper and secure installation. External test switch and monitor LED are standard.
6V TUNGSTEN:standard: 9w,(H) halogen: 8w, 10w, 12w, 20w 6V SEALED BEAM:(SB) standard: 9w, 12w, 18w (SBH) halogen: 12w, 20w 12V TUNGSTEN:standard: 9w, 18w (H) halogen: 8w, 12w, 20w, *35w, *55w (*LR only) 12V SEALED BEAM: (SB) Standard: 12w, 18w (SBH) halogen: 8w
The TES-EDT is constructed from a durable, fully gasketed NEMA 4x rated fiberglass housing. The front access panel is hinged for trouble-free installation and maintenance. Four integrated mounting feet ensure proper, secure and accurate wall or ceiling installation on to most surfaces. The TES-EDT is supplied standard in an industrial grey fiberglass finish.
The TES-EDT series utilizes a pulse switching charger that is up to 70% more efficient than traditional constant voltage chargers.The charger is a fully automatic current limited charger with solid state line-latched low voltage disconnect protection. All components used in the circuitry are temperature compenated. The charger also has brownout and short circuit protection. Charger status is easily determined via a dual diagnostic LED display which indicates AC/ON and High Charge. An external push button test switch allows maintenance personnel to quickly determine the operational status of the unit and lamp load.
The TES-EDT series is designed with a maintenance free, sealed valve regulated lead acid battery that provides a minimum emergency duration of 90 minutes (for the listed rating).Recharge time of the battery is twenty-four (24) hours. The maximum working temperature is 50 C.
The TES-EDT series is normally supplied with two (2) top mounted (LR) Par36 style 9w heads. Lamp head styles are constructed of high impact thermoplastic in a color matching the finish of the cabinet (industrial grey is standard). Please note: (LR) Par36 style food-prep approved lenses are also available when ordering
The TES-EDT luminaire is suitable for surface wall or ceiling and pendant mounting. Suitable for NEMA 4x required installations on normally inflammable surfaces.
TES AUTO-TEST (AT)
The TES-EDT auto-test feature automatically monitors the functional operation of the unit. Auto-test monitors the operation of the lamps, battery and circuitry and displays any alerts. Periodic emergency tests, up to ninety (90) minutes duration are simulated to ensure proper operation during an actual power failure. Operating status is visually indicated by multi-function LED indication.
The TES-EDT comes from the factory with an unconditional 5 year product warranty. Lamps are not covered.