RECESSED CHICAGO APPROVED GIMBAL EMERGENCY LIGHT WITH BATTERY BACKUP

Download TES-RCD Recessed Emergency Light Cut Sheet

PRODUCT OVERVIEW

The TES-RCD series Chicago Approved emergency luminaire has been designed to be fully recessed and blend in with the surrounding environment. The housing and gimbal assembly use corrosion and flame resistant lightweight aluminum. All TES-RCD electronics are fully self-contained within the housing; this allows for easy handling and effortless installation. The standard trim plate comes finished in powder coat white.

EXTERNAL SPECIFICATIONS

The TES-RCD series is constructed from durable and lightweight aluminum. The standard trim plate is finished in white powder coat. External test switch and monitor LED are standard.

MECHANICAL SPECIFICATIONS

The TES-RCD is constructed with corrosion and flame resistant lightweight aluminum. The gimbal assembly allows for proper beam positioning. All electronics are fully self-contained allowing easy handling and installation. The RCD comes standard with a single 12W halogen lamp. The trim plate is finished in durable powder coat white. External test switch and monitor LED are standard.

CHARGER SPECIFICATIONS

The TES-RCD series utilizes a pulse switching charger that is up to 70% more efficient than older constant voltage chargers. The charger is a fully automatic current limited charger with solid state line-latched low voltage disconnect protection. All components used in the circuitry are temperature compensated. The charger also has brownout and short circuit protection. Charger status is easily determined via a dual diagnostic LED display which indicates AC/ON and High Charge. An external push button test switch allows maintenance personnel to quickly determine the operational status of the unit and lamp load.

LAMPHEAD FEATURES

The TES-RCD series is supplied with one (1) 8 watt bi-pin halogen lamp. The fully recessed design of the RCD uses an adjustable gimbal for correct and accurate beam positioning.

BATTERY TECHNOLOGY

The TES-RCD series is designed with a 6V 4Ah maintenance free, sealed valve regulated lead acid battery that provides a minimum emergency duration of 90 minutes (for the listed rating). Recharge time of the battery is twenty-four (24) hours. The maximum working temperature is 50 C.

INSTALLATION

Suitable for installation into suspended, plaster, and sheetrock ceiling applications. Instructions and mounting hardware are included with the RCD. 120/277VAC.

WARRANTY

The TES-RCD comes from the factory with a 3-year product warranty. Lamp is not covered.