RECESSED ALUMINUM GIMBAL EMERGENCY LIGHT WITH BATTERY BACKUP

Download TES-RDO Recessed Emergency Light Cut Sheet

PRODUCT OVERVIEW

The TES-RDO series emergency luminaire has been designed to be fully recessed and blend in with the surrounding environment. The housing and gimbal assembly use corrosion and flame resistant lightweight aluminum. All TES-RDO electronics are fully self-contained within the housing; this allows for easy handling and effortless installation. The standard trim plate comes finished in powder coat white.

EXTERNAL SPECIFICATIONS

The TES-RDO series is constructed from durable and lightweight aluminum. The standard trim plate is finished in white powder coat. External test switch and monitor LED are standard.

MECHANICAL SPECIFICATIONS

The TES-RDO is constructed with corrosion and flame resistant lightweight aluminum. The gimbal assembly allows for proper beam positioning. All electronics are fully self-contained allowing easy handling and installation. The RDO comes standard with a single 8W halogen lamp. The trim plate is finished in durable powder coat white. External test switch and monitor LED are standard.

CHARGER SPECIFICATIONS

The TES-RDO series utilizes a pulse switching charger that is up to 70% more efficient than older constant voltage chargers. The charger is a fully automatic current limited charger with solid state line-latched low voltage disconnect protection. All components used in the circuitry are temperature compensated. The charger also has brownout and short circuit protection. Charger status is easily determined via a dual diagnostic LED display which indicates AC/ON and High Charge. An external push button test switch allows maintenance personnel to quickly determine the operational status of the unit and lamp load.

LAMPHEAD FEATURES

The TES-RDO series is supplied with one (1) 8 watt bi-pin halogen lamp. The fully recessed design of the RDO uses an adjustable gimbal for correct and accurate beam positioning.

BATTERY TECHNOLOGY

The TES-RDO series is designed with a 6V 4Ah maintenance free, sealed valve regulated lead acid battery that provides a minimum emergency duration of 90 minutes (for the listed rating). Recharge time of the battery is twenty-four (24) hours. The maximum working temperature is 50 C.

INSTALLATION

The TES-RDO emergency luminaire is suitable for ceiling recess installations. Suitable for indoor location installations on nomally inflammable surfaces. 120/277VAC.

WARRANTY

The TES-RDO comes from the factory with an unconditional 5 year product warranty. Lamp is not covered.