WET/DAMP LOCATION, VANDAL RESISTANT EXIT CAST ALUMINUM/POLYCARBONATE CSONSTRUCTION

PRODUCT OVERVIEW

The Exit Stores TL wet location and harsh environment exit combines rugged construction and appealing aesthetics. Durable cast aluminum and polycarbonate housing construction, standard vandal resistant/anti-corrosion coated hardware and Intelli-Charge electronics ensures long lasting reliability even in the most severe environments. The TL is UL listed for use in wet/damp location applications ranging from -40°F (-40°C) to 113°F (45°C). Tuff-Act exits are shipped with field-selectable chevrons, and can be ordered as a single face or universal (single/double) face configuration. Three color choices are available and stencils may be ordered to match or in an attractively contrasting brushed aluminum finish.

ILLUMINATION

Illumination of the exit stencil face is accomplished with long lasting, high output Light Emitting Diodes (LEDs). Hot spots and striations are eliminated by the internal light chamber, which is specially designed around the high performance LED array. Average illumination levels are in excess of 25fl (79 cd/m2).

HOUSING

Die-cast aluminum housing with premium impact-resistant injection molded polycarbonate covers. Housing is powder coated and back cover is molded in color to match. Front cover is clear. Stencil is provided with field selectable chevrons and is contained inside the fully gasketed housing. All exposed hardware is both vandal resistant and anticorrosion coated. Universal knockouts on backplate allow wall mounting directly to standard junction boxes. Die-cast aluminum canopy is provided for top/side mounting and is powder coated to match housing. Two knockouts are located on the frame to accommodate 1/2” flex or rigid conduit.

ELECTRONICS

AC Only - 120/277 VAC dual voltage input with surge protection is standard on all models. Self-Powered - Charging system is microprocessor driven with software embedded diagnostic routine and temperature compensation. See specification sheet C1465 for electronics details. 120/277 VAC input, surge protection, brownout, AC lockout and low voltage disconnect features are standard.

SELF-DIAGNOSTICS

The Intelli-Charge diagnostic/charging platform with selftesting mode automatically runs a one-minute self-test every 30 days and a 30-minute test on the sixth and twelfth month. A one-minute or 90-minute test may be initiated via the push to test switch on the unit or by activating the appropriate test command on the optional IR test device.

BATTERY

Maintenance-free, sealed nickel cadmium battery Supplies 120 minutes of emergency power Estimated service life of 10 years Operating temperature range of -40°F (-40°C) to 113°F (45°C) Compliant with IEC 61951-1

CODE COMPLIANCE

UL 924 listed

UL damp and wet location listing -40°F (-40°C) to 113°F (45°C)

NFPA, UL, IBC, NEC, BOCA and OSHA illumination standard

Energy Star compliant

Meets ADA specifications for wall mounted lighting fixtures

IEC 61951-1 Life Testing (batteries)

WARRANTY

Five-year full electronics warranty. Five-year full plus five-year prorated battery warranty.

ELECTRICAL SPECIFICATIONS

AC Only Operation - Input Power Requirements Red – 3.8 watts (120 VAC), PF = 0.96 3.8 watts (277 VAC), PF = 0.91 Green – 4.0 watts (120 VAC), PF = 0.95 4.0 watts (277 VAC), PF = 0.90 Self-Powered - Input Power Requirements Red – 4.7 watts (120 VAC), PF = 0.95 4.8 watts (277 VAC), PF = 0.97 Green – 4.7 watts (120 VAC), PF = 0.95 4.7 watts (277 VAC), PF = 0.99