WAVE RIDER III (10-62.5 KVA)

FEATURES

10 to 62.5 KVA

CSA Listed to UL 924, UL924A, & UL1778

Incandescent, Fluorescent, HID, HPS

Power Factor & Energy Efficient Ballast

90% Efficiency

Sinusoidal Waveform

Pulse Width Modulated (PWM)

Generator Compatible

LCD Panel for Continuous Self Diagnostics

Modular Assembly for Ease of Installation

Transformerless Technology

Battery Exerciser

Double Conversion Technology

Stackable Cabinets

Seismic Rated with Bracket Kit

Remote Monitoring

RS-232 & 485

90 minutes Run Time @ 100% Load

10 year Pro Rated Maintenance Free Batteries

2 Year Factory Warranty

SPECIFICATION

Power Rating: 10, 15, 20, 25, 30, 40, 50, and 62.5 KVA
Input Voltage: 208Y/120 or 480Y/277 VAC (-20% to +15%)
Output Voltage: 208Y/120 or 480Y/277 VAC
Output Frequency: (Inverter Operation): 60Hz +0.5Hz.
Voltage Reg: +3% Regulated within CBEMA curve
Output Wave Form: Sine-wave<5%THD
Efficiency: 90% minimum
Crest Factor: 3.1 Typical
Serge Protection: The inverter will protect itself and the load against surge as defined in ANSI/IEEE C62.41 category A and B.
Isolation: Complete from line. Output neutral bonded to ground
Noise Isolation: -120 dB. Common-Mode. 60 dB. Transverse-Mode
Battery: 10 Year pro rated maintenance free(AGM)Battery
Recharge Current: Conforms to UL Standard
External Battery: Provisions for hardware connection of optional external battery cabinets or DC source.
Environmental: Humidity: 0-95% RH w/no condensation Operating temperature:
UPS: 0°C to +40°C. (-32°F to 102°F)
Battery: 20°C to +30°C. (68°F to 86°F)
Storage temperature: -20 to 60C(-4-140F) Altitude:Up to 10,000ft
Safety Agencies: CUL, CSA Listed UL1778, UL924